Legacy Support

The DIT-MCO Dual-50 connector was adopted in early generations of DIT-MCO test systems as the standard interface. While it is not frequently used in new systems, it is available to provide compatibility with existing test systems and adapters. There are 50 contacts in each side of the connector. A screw jack is used to mate the connector.

Mating Connectors

025-04623-0003 100 Contact Plug
007-01157-0004 Pins for 26 – 30 AWG (quantity 100)
007-01157-0005 Pins for 20 – 24 AWG (quantity 100)
007-01157-0006 Pins for 16 – 18 AWG (quantity 100)
005-04706-0002 Cable clamp (two required)

Specifications

DD-50 Diagram

A 024-04624-0003 Contact Receptacle M 007-01157-0005 Pin 20-24 AWG
B 024-04624-0030 Frame Assembly M 007-01157-0006 Pin 16-18 AWG
C 024-04624-0031 Jack Screw Socket N 007-01158-0004 Socket 26-30 AWG
D 024-04624-0032 “C” Ring N 007-01158-0005 Socket 20-24 AWG
E 025-04623-0003 Connector Plug N 007-01158-0006 Socket 16-18 AWG
F 025-04623-0030 Plug Frame O 052-01862-0001 Pin/Socket Extractor
G 025-04623-0031 Ground Clip P 020-09597-0001 Jack Screw Tool
H 025-04623-0032 Jack Screw      
I 025-04623-0033 Connector Shell Guard Also Available:
J 025-04623-0034 Plug Insert   052-01851-0001 Crimping Tool
K 025-04623-0035 Retaining Bushing   510064-DC1 Dust Cover-100 Contact Receptacle
L 005-04706-0002 Cable Clamp (2 required)   510064-DC2 Dust Cover-100 Contact Plug
M 007-01157-0005 Pin 26-30 AWG      

For cable testing, harness testing and other automated product testing solutions, customers rely on DIT-MCO wiring analyzers.

Kontaktieren Sie Uns