Ramping

C .1A <2.5R .001T .005S

Ramping is optional, although it is beneficial when conducting high-voltage tests, such as leakage, DC HiPot, and AC Dielectric. It is inserted after the stimulus value. The syntax for ramping is:

RON=100  Ramp on at 100 volts per second.
ROFF        Turn off the ramping function.

Since the example parameter statement does not need ramping, it is not specified; therefore, nothing is highlighted.

Source: NETS User Manual, Revision D, document 132-06035-0006, section 4.3.1.4.